Cuben Fiber Hybrid Backpack with Removable Internal Frame

After seeing some of the cuben hybrid material used on the Zpacks Exo backpacks, I decided to try some on my own version of a cuben pack. 

The idea with this pack is to make something big enough to hold a Bearikade Weekender or Expedition bear canister plus some winter gear, but still keep it around 8 ozs. I made one out of just cuben and used it on the JMT last summer, but calling it a 'prototype' would be pushing it. People usually passed me and said, "hey, homemade pack heh?". To make things worse it was made out of some bright blue cuben I got on sale on gearswap. 

I also wanted something that would hold up to 35 - 40 lbs if I needed to carry extra stuff for a few miles to our favorite Sierra waterslides this summer. I added channels for a removeable internal frame (taken from a GG Gorilla) to handle heavier loads. 

Plus, I wanted something that could take some serious abuse on the Sierra High Route this summer. 

The material is all available at Zpacks.com. The cuben hybrid is made from 1.43 oz black cuben on the inside and 50 denier polyester on the outside. It feels strong and tear resistent. 

For the pack design I borrowed generously from the Blast and Gorilla packs. For the shape of the shoulder straps I traced a North Face daypack. Some of the more original things added are adjustable elastic cords at the top of all the exterior pockets and adjustable pad straps. I like having two medium sized rear pockets instead of one large pocket. It makes it easier to find stuff after a long day.

The cuben hybrid material is attached to the bottom 3" of the pack and side pockets using a triple stitched flat felled seam. All of the attachment places are reinforced with cuben bonded to the main material at a 45 degree angle. The area where the shoulder straps attach to the main pack is triple reinforced. The internal channel for the removeable frame is made from the heavier cuben hybrid material. I noticed that the ends of the frame cut through the channel made from 1.43 oz cuben in the earlier prototype, but the hybrid doesn't rip. 

The total pack size is about 3,250 c/i. The main pack bag is 2,500 c/i, side pockets 300 c/i, rear pockets 450 c/i. The main pack is 6" deep, 12" wide and about 34" tall.

The total weight is 9 ozs (without the internal frame). The heavier cuben hyrid material added about 2.5 ozs compared to a similar pack I made with just cuben. The removeable internal frame adds 3 ozs. 



Side view (with internal frame and Gossamer Gear sitpad for back padding). 



The bottom 3" are made with the more durable cuben/nylon hybrid from Zpacks.com. 

Interior detail of the internal frame channels (without the frame)

Interior detail of the frame channels (with the frame)

Adjustable front pocket (open)

Adjustable front pocket (closed)

Adjustable side pocket (open)

Adjustable side pocket (closed)



Shoulder strap attachment detail. There is a third layer bonded at a 45 degree angle inside the pack. 

5 comments:

  1. Looks great! Any chance of you posting the pattern? I would love to give something like this a try.

    ReplyDelete
    Replies
    1. Thanks for your comment! I'm sorry but I don't have a pattern. I usually make new adjustments and improvements each time. The basic idea for these packs is to make each one like a stuff sack, but add the shoulder straps, hip belt, pockets and all other attachments before sewing the long triple stitched flat felled seam that runs along the back, then fold the bottom like the bottom of a stuff sack. The actual process is easier than it sounds. Give it a try! . . . or just buy a Zpacks Zero and try to emulate his design.

      Delete
  2. Replies
    1. Right on pyrotek. Long live the lightweight backpack!

      Delete
  3. All the contents you mentioned in post is too good and can be very useful. I will keep it in mind, thanks for sharing the information keep updating, looking forward for more posts.Thanks Justice Backpacks

    ReplyDelete